TVS Diodes
Surface Mount – 600W > TPSMA6L series
TPSMA6L Series RoHS Pb e3
Uni-directional Description
The TPSMA6L series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by load dump and_other transient voltage
events， and_it’s especially suitable for high reliability and_
automotive application.
SMA low profile package (DO221-AC) has the same
electronical performance as the SMB package but with low
height profiles (1.1mm).
Agency Approvals Features
AGENCY AGENCY FILE NUMBER ? Same power as standard clamping capability
E230531 SMB devices (600 W) ? Fast response time:
? Hi reliability application typically less than 1.0ns
and_automotive grade from 0 Volts to VBR min
Maximum Ratings and_Thermal Characteristics AEC Q101 qualified ? Built-in strain relief
(TA=25OC unless otherwise noted) ? SMA low profile package: ? Glass passivated junction
Parameter Symbol Value Unit less than 1.1 mm ? High temperature
Peak Pulse Power Dissipation at ? Footprint compatibility soldering: 260°C/10
TA=25oC by 10x1000μs Waveform PPPM 600 W with standard SMA and_ seconds at terminals
(Fig.2)(Note 1)， (Note 2) SMB products (easy to ? Plastic package has
Power Dissipation on Infinite Heat layout) underwriters laboratory
Sink at TA=50OC PM(AV) 3 W ? Typical failure mode is flammability V-0
Peak Forward Surge Current， 8.3ms short from over-specified ? Typical maximum
Single Half Sine Wave (Note 3) IFSM 60 A voltage or current temperature coefficient
Maximum Instantaneous Forward ? Whisker test is conducted ΔVBR = 0.1%_x VBR@25°C x ΔT
Voltage at 25A for Unidirectional VF 3.5V V based on JEDEC ? Matte tin lead–free plated
Only JESD201A per its table 4a
Operating Junction and_Storage and_4c ? Halogen free and_RoHS
Temperature Range TJ， TSTG -65 to 150 °C compliant
? IEC-61000-4-2 ESD ? Pb-free E3 means 2nd
Typical Thermal Resistance Junction RuJL 35 °C/W 15kV(Air)， 8kV (Contact)
to Lead ? ESD protection of data level interconnect is
Typical Thermal Resistance Junction lines in accordance with Pb-free and_the terminal
to Ambient RuJA 200 °C/W IEC 61000-4-2 finish material is tin(Sn)
? EFT protection of data (IPC/JEDEC J-STD-
Notes: lines in accordance with 609A.01)
1. Non-repetitive current pulse， per Fig.4 and_derated above TA=25oC per Fig. 3.
2. Mounted on 5.0x5.0mm copper pad to each terminal. IEC 61000-4-4
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional ? Low inductance， excellent
device only.
Functional Diagram Applications
Bi-directional TVS devices are ideal for the protection of I/O Interfaces，
VCC bus and_other vulnerable circuits used in Telecom，
Computer， Industrial and_Consumer electronic applications.
Cathode Anode
